Maintaining chlorine or bromine levels in public swimming pools, or even in private swimming pools at home, is an important first stage in preventing bacteria that cause recreational diseases. The weekly test will greatly help you with the proper care you need to keep the pool water clean and safe for everyone to enjoy. Taking time to monitor the level of chemicals in the pool will prevent you from needing to monitor your health later. Microwave liquid sterilization manufactor Installing microwave electrodeless ultraviolet sterilization equipment can eliminate pathogens and bacteria, which will reduce the effectiveness of chlorine and will not leave any residue. Customized Microwave liquid sterilization Ultraviolet is safe and is a widely used sterilization method for water, air and medical supplies. Most people who get sick because of recreational water will have diarrhea, cough, eye pain and even skin rashes. When people enter the pool without taking a shower, they are introducing bacteria, such as sweat, feces and any other bacteria they come in contact with.

working principle: The thermal storage catalytic combustion equipment uses natural gas to directly burn organic waste gas. Under the temperature of 750~850 ℃, organic molecules are decomposed into CO2 and H2O. The burned flue gas accumulates heat in the ceramic through the thermal storage ceramic brick, preheats the organic waste gas, and then discharges it. The inlet and outlet directions of the waste gas are automatically switched by the switch valve, and work circularly, RTO can fully recover and burn organic decomposition heat energy, which greatly reduces the energy consumption of the system. Catalytic combustion equipment is applicable to industries: Applicable to the treatment of mixed combustible organic waste gas and odor with large and medium concentration (thousands of ppm) and medium air volume Applicable to waste gas treatment in paint shop Applicable to waste gas treatment of electronic product manufacturing and integrated circuit Applicable to waste gas treatment in printing process and injection molding process Applicable to the treatment of organic waste gas generated in petrochemical, medical and other industries Technical features of regenerative catalytic combustion equipment: Wide range of exhaust gas; High waste gas treatment efficiency; Less maintenance work, safe and reliable; Low pressure loss and high purification efficiency; Long service life of equipment; Low operation cost

Stainless steel wire woven filter screen is often used, 30-40 hole/cm filter screen is used for crude oil filtration, and 140-180 hole/cm filter screen is used for decolorization oil filtration. Customized Microwave liquid sterilization The selection of filter medium will affect the clarification of filtered oil and fat, and whether the cake unloading is smooth. The filter media used in the grease industry are mostly woven media, Microwave liquid sterilization manufactor Common cotton fabrics such as canvas, twill and ordinary white muslin with 20 yarns and 5-8 strands.

UV disinfection is generally only used for air and instrument surface disinfection. Surgical dressings cannot be treated by UV radiation as a routine method. Ultraviolet radiation is the general term of radiation in electromagnetic spectrum with wavelength from 10nm to 400nm, which can not cause people's vision. In 1801, German physicist Ritter found that the ultraviolet ray could sensitize the photographic negative containing silver bromide at the outer part of the ultraviolet end of the sunlight spectrum, so he found the existence of ultraviolet ray. Too much ultraviolet rays entering the body will cause skin cancer. Customized Microwave liquid sterilization It can be disinfected after use every day. It should be disinfected two or three times a week. It is recommended that the toothbrush head should be replaced every three months. It can be disinfected every day. The SEGA toothbrush sterilizer I selected should be disinfected for 6-8 minutes each time. It is a good ultraviolet disinfection lamp. It needs to be equipped with a ballast. Mould formation is due to long-term lack of ventilation and humidity, Microwave liquid sterilization manufactor If ventilation and moisture removal are available, mold will not grow. Since mold has been formed, first kill it with a mold remover, and then put a moisture bag such as a charcoal bag. I often do on-site mildew and odor removal projects. You can sprinkle lime on the corner of the wall or place charcoal in the house to absorb moisture when the house is wet. In addition, don't open the window in foggy or rainy weather. Open the window in good weather to ventilate in time.