Nowadays, more and more gypsum blocks are used for construction. Gypsum blocks can be naturally cured after forming. The traditional methods are sun drying, air drying, etc. But these soil methods are too inefficient, and due to weather restrictions, they can no longer meet the growing needs of the drying market. If the finished products are obtained through intelligent drying equipment, the production efficiency will be greatly improved, It saves manpower and labor time.
The gypsum block drying room produced by Dehai is a good solution for customers. Steam, natural gas and biomass particles can be used as heat sources for drying gypsum blocks.

Gypsum block drying room can be continuously kiln dried, with an average of 1-2 hours
High drying efficiency of gypsum blocks, 200 type hollow gypsum blocks can dry 270 square meters in 18 hours, and 100 type solid gypsum blocks can dry 480 square meters in 36 hours
The quality of the products dried in the gypsum block drying room is uniform, the error can be controlled at 4%, the surface is smooth, and there is no drying crack, frost, etc
Gypsum block drying adopts PLC, frequency conversion control, intelligent one button start, from heating, temperature control, hot air circulation, dehumidification, after drying, remind to exit the kiln, electric door, etc., through the program, fully automatic work, redundancy protection and other functions are complete
The frequency conversion technology is adopted in the gypsum block drying room, so that the power consumption and steam capacity can be reduced to a minimum, and the purpose of fast drying can be achieved at a low cost.