Many users report that using Microwave ultraviolet water treatment equipment Efficiency is too low. This is actually related to many aspects. Let's see how to do it together.

1. To solve the problem of light reactivation: open the channel to realize underground water outflow, to avoid or reduce the visibility of treated water before entering the pipeline. At the same time, dark containers containing test water samples shall be used and sent for inspection in time to avoid factors such as storage conditions or test time affecting the test results.    

2. Improve the light transmittance: adjust the front-end treatment process to reduce the SS mass concentration of the water in the UV disinfection device, and adjust the UV disinfection I to ozone decolorization. In this process, the chromaticity of the incoming water is reduced to ensure that the SS is controlled below 10 mg/L; The front-end technology has been adjusted to strictly control the consumption of PAM and other chemicals, and a defoaming device has been installed at the water inlet of the external disinfection device to reduce the foam content in the water body and increase the light transmittance of the water body.

3. High UV dose: increase the UV dose by extending the exposure time or increasing the number of UV tubes in the system. Generally, the volume of reactor is difficult to change, and the intensity of ultraviolet can be increased by increasing the number of ultraviolet lamps or increasing the power of ultraviolet lamps.  

4。 Others: Conduct arc treatment on the inner edge of the rectangular reactor to optimize its hydraulic conditions and reduce the short flow phenomenon. At present, the ultraviolet sterilizer has developed into a mature and reliable sterilization technology, and has been widely used in various fields at home and abroad, becoming a substitute for traditional chemicals.

As the mainstream technology of sterilization technology, the ultraviolet sterilized sewage can effectively realize the recycling of sewage, which can be used to irrigate farmland, forest land, lawn, etc., and avoid the consumption of chemicals. Plant damage caused by poisons; Groundwater recharge can prevent microorganisms from adapting to chemical disinfectants and re spreading formation blockage.