Microwave ultraviolet water treatment equipment In general, the following aspects should be paid attention to when selecting the ultraviolet sterilizer, and the reasonable selection of the ultraviolet sterilizer should be carried out according to the water quality condition and water treatment capacity: the main factors affecting the disinfection effect of the ultraviolet sterilizer are the ultraviolet radiation intensity and time, the radiation intensity and the ultraviolet lamp and ballast selected by the manufacturer of the ultraviolet sterilizer. Adapting to the casing is directly related. High quality UV disinfection lamp has the characteristics of high intensity and stable intensity. The irradiation time is related to the equipment length of the UV sterilizer and the water flow planning speed. Professional UV sterilizer manufacturers will make reasonable layout in these two aspects, The ultraviolet sterilizer used for daily drinking water disinfection needs to use 304 and above high-quality stainless steel as raw materials.     

The wading part needs to pass the safety certification of the foam penetration test. After the ultraviolet sterilizer is used, the ultraviolet disinfection lamp should be replaced regularly according to the manufacturer's regulations, and the quartz sleeve should be cleaned regularly to ensure that the ultraviolet sterilizer has continuous and stable disinfection ability, so that the pretreated water can be exposed to sufficient ultraviolet radiation with a wavelength of 253.7 nm when passing through the cylinder.