Breeding sterilization and disinfection equipment Processing and manufacturing is a device composed of ultraviolet lamp, ultraviolet electronic ballast, reaction chamber, flange or wire, sealing component, quartz sleeve, control box, etc. At present, it is widely used in many factories, etc., with large market demand and rapid development.        

breed Sterilization equipment The UV lamp is a very important component. Its service life and quality are directly related to the disinfection effect and quality of the UV sterilizer. The service life of a good UV lamp can reach about 12000 hours. However, because the intermittent attenuation of the amount of UV irradiant during the use of the lamp will affect the killing effect, it is recommended to use imported UV lamps. The imported ultraviolet lamp has high cost, but it can save energy and ensure high service value.   

Breeding sterilization equipment The reaction chamber of is a container where water is sterilized in ultraviolet ray. It is mainly made of high-quality stainless steel by welding, polishing and polishing. The quartz sleeve in the ultraviolet sterilizer is also very important to limit the guarantee and effect of the ultraviolet C wave more Y effect. The flange of the UV sterilizer is used to connect the water inlet and outlet. The quality of the flange is related to the N use and pressure bearing capacity of the UV sterilizer interface. The UV sealing component is used in the UV sterilizer to protect the water inflow and outflow of the UV lamp. The quality of the rubber ring is related to the cleanliness and N use of the water, because the rubber ring will also be exposed to UV radiation directly in contact with the water, which is prone to aging, causing cost waste.