I don't know Microwave ultraviolet water treatment equipment What are the factors for stable operation UV water treatment equipment manufacturer I'd like to introduce it to you and hope you can read it carefully:

1、 Water temperature control:

1. The inlet water temperature, that is, the raw water temperature of the water is normal temperature, which is about 5 ℃ to 45 ℃, so that the equipment can operate stably.

2. Microwave Ultraviolet water treatment equipment The manufacturer pays special attention to that we must not operate below zero degrees Celsius to prevent freezing and other factors from affecting the normal operation of the equipment

2、 Space issues:

The equipment shall be in a relatively spacious space, and it shall be fixed on a platform. The drainage problem shall be handled well, and the space shall be reserved for easy maintenance and operation.

3、 Selection of power supply:

1. The power supply is the foundation. It should be used carefully. Generally, it needs to work under 200V/50Hz AC to ensure the correct operation of the complete set of automatic water softening device.

2. Microwave ultraviolet Water treatment equipment The manufacturer shall ensure that the power cannot be cut off, and the switch of the equipment shall not be cut off, so as to prevent the quality problems of the softened microwave ultraviolet water treatment equipment and the increase of equipment loss.

4、 Water pressure requirements:

1. The microwave ultraviolet water treatment equipment requires that the inlet water pressure should be controlled within the range of 0.2 MPa to 0.6 MPa. If the original water pressure cannot reach this range, we will increase the inlet water pressure and need to install a booster pump outside the operating system.

2. If the pressure is too high, we need to install auxiliary equipment other than the softened water equipment system to adjust it. Generally, the pressure reducing valve is used to control the inlet water pressure.

Improper operation of microwave and ultraviolet water treatment equipment will affect the quality of the whole system, and even directly affect the operation of water in the later period. Therefore, we should observe the above mentioned factors, in addition, we should also do a good job in daily maintenance.