新上海sh419

 Microwave ultraviolet water treatment equipment
Your current location: home page > News Center > Common News

What are the differences in the use characteristics of microwave electrodeless ultraviolet sterilization equipment in different climatic regions?

2021-06-28
second

Microwave electrodeless ultraviolet sterilization equipment The disinfection effect is determined by the ultraviolet dose. Now there is a misunderstanding. Some so-called ultraviolet sterilizer manufacturers and users believe that it is not practical to declare that the disinfection effect of low-voltage ultraviolet mercury lamp with 253.7 nm wavelength single spectrum output is better than that of medium voltage ultraviolet lamp with multi spectrum output. There is no only ultraviolet disinfection wavelength for many microorganisms. It is very necessary to add front-end filtration, flocculation, sedimentation and other treatment processes, especially in the process of sewage disinfection, the elements of water quality conditions must be considered. In the microbial test of the disinfection effect of the ultraviolet sterilizer, the ultraviolet disinfection technology is the same as any technology, In terms of water quality, how much will the total suspended solids (TSS) and solid particle standards affect the disinfection effect of the ultraviolet sterilizer. During water treatment, a microwave Electrodeless ultraviolet sterilization equipment The useful ultraviolet dose that the disinfection system can complete after considering other factors and necessary safety factors shall not be less than the biochemical dose required by the curve to sterilize microorganisms to a certain extent.

 Microwave electrodeless ultraviolet sterilization equipment


The pre assembled module assembly with quick connector cable is convenient for device and protection waterproof grade composite IP68 standard, suitable for occasions with strict requirements, smaller water resistance, higher reliability, sensitive modular combination planning, real-time ultraviolet dose control function, built-in self diagnosis of special electronic ballast for ultraviolet line lamp, Active fault alarm and shutdown are equipped with lamp startup protection function. The on-site or remote output of lamp status alarm signal can be supplied to the original imported or domestic products according to the user's requirements. Specialized planning, sensitive modular planning, easy installation and maintenance can be carried out according to the user's project requirements to satisfy different use occasions.


Recent browsing:

Share to