Microwave electrodeless ultraviolet sterilization equipment In order to achieve the same disinfection effect at low water level without changing the power of a single lamp, it can not only save energy, but also enable the irradiation energy to reach the required dose. When the water level rises, it will take the initiative to turn over the corresponding lamp. The type ultraviolet sterilizer is also called the frame type ultraviolet sterilizer: odorless ultraviolet sterilization lamp, and the inner wall of the cylinder is made of specially processed food grade 304 stainless steel. The pretreated water will be illuminated by the ultraviolet ray of 253.7 nm wavelength when passing through the cylinder, which has outstanding bactericidal effect. Since it does not change the physical and chemical properties of the water, it is an indispensable excellent equipment in the fields of electronics, medicine, food, chemical industry, etc. The ultraviolet sterilizer does not produce any secondary pollutants.     

Due to the new disinfection technology in the world, it has the advantages of high efficiency, broad-spectrum, low cost, long life, large amount of water, pollution-free and other disinfection methods that cannot be compared with other disinfection methods. At present, it has gradually become a mainstream disinfection method in western developed countries. The device strategy of type UV sterilizer: take out all the accessories and check them, first install the sealing sleeve at the open end of the quartz tube as shown in the figure, Install the quartz tube into the stainless steel shell, and then install the sealing ring on the quartz tube.

microwave Electrodeless ultraviolet sterilization equipment It is very common for large sewage treatment plants to use ultraviolet disinfection modules to disinfect water quality. Many sewage treatment stations use independent ultraviolet disinfection modules or use composite processes to disinfect water quality. With the extension of equipment use time, some disinfection equipment has failed to achieve the expected disinfection effect. The acquisition of new disinfection equipment will lead to the addition of input costs. In order to facilitate the continuous use of disinfection equipment by users, the company specializes in providing repair, maintenance and equipment upgrading and transformation services for ultraviolet disinfection modules. The disinfection effect of ultraviolet disinfection modules is not only affected by the design of its own products, but also by the disinfection water quality and installation conditions.    

Taking civil engineering installation as an example, improper installation scale will directly reduce the disinfection power of disinfection water quality. The ultraviolet disinfection channel should match the ultraviolet disinfection module. If the disinfection channel is too wide or too deep, it will lead to the direct discharge of sewage that has not been effectively disinfected, which will seriously affect the disinfection effect. The suspended solids, nitrogen, Phosphorus content will also affect the disinfection effect of ultraviolet light, especially the content of suspended solids. Too much suspended solids will cause bacteria to clump, which cannot be used for sterilization. The quartz sleeve in the ultraviolet disinfection module is a fragile product, and many customers have no maintenance experience, resulting in the breakage of quartz tube during maintenance.