Microwave electrodeless ultraviolet sterilization equipment Maintenance:

1. Microwave Electrodeless ultraviolet sterilization equipment Check regularly to ensure the normal operation of the UV lamp.

2. Microwave electrodeless Ultraviolet sterilization equipment After continuous use for 9000 hours or one year, the ultraviolet lamp should be replaced to ensure a high sterilization rate. Please pay special attention to that the ultraviolet ray should be kept on, because repeated opening and closing will seriously affect the service life of the lamp.

3. Microwave electrodeless ultraviolet Sterilization equipment When replacing the ultraviolet lamp, first unplug the power socket of the lamp and take out the ultraviolet lamp. When replacing a new lamp tube, be careful not to touch the quartz glass of the new lamp tube with your fingers, because the stain will affect the sterilization light. At the same time, carefully put the lamp tube into the stainless steel sterilizer.

4. If there are hardness (calcium or magnesium) substances, iron or manganese in the water, the quartz tube in the microwave electrodeless ultraviolet sterilization equipment needs to be cleaned regularly. After cleaning the quartz tube, you should wear special plastic gloves to carefully load the quartz tube into the reactor. After installing the sealing ring, you should check whether the microwave electrodeless ultraviolet sterilization equipment has water leakage. Plug in the power supply to ensure that the detection lamp of the microwave electrodeless ultraviolet sterilization equipment is stable.