If the equipment is operated for a long time, the reverse osmosis pure water equipment technology will fluctuate. Once the pure water equipment is not properly treated, the membrane performance of the equipment will decline, and the equipment may not be used due to the severity. We take maintenance measures in a short time, and properly stopping equipment operation is also a method of equipment cleaning and maintenance.

Breeding sterilization and disinfection equipment The primary purpose of the filter with multiple filter layers is to remove the sediment, rust, colloidal substances, suspended solids and other substances with particles of more than 20um in the raw water. Manual valve control or full-automatic controller can be used for backwashing, forward flushing and other operations. Ensure the quality of water produced by equipment, and extend Manufacturer of breeding sterilization and disinfection equipment Service life of
Check whether the power is cut off and the plug is firmly inserted. View breeding Sterilization equipment Whether the wiring plug of low-voltage switch falls or fails to work, so that the power contact cannot return. Check whether the connecting wire of each terminal falls off, and check whether the water pressure of tap water is too low, so that the low-voltage switch does not work.

Breeding sterilization Equipment technology is to use double-layer ultrafiltration membrane for breeding sterilization equipment, or combine ultrafiltration membrane and reverse osmosis filtration membrane for application. breed Sterilization equipment manufacturer When the external pressure is applied on the concentrated solution side, the penetration speed will decrease. When the pressure increases to a certain value, the penetration process will stop and the so-called penetration equilibrium will be reached. The external pressure of the equilibrium condition is called the penetration pressure. When the pressure on the concentrated solution side continues to increase, that is, when the applied pressure is greater than the penetration pressure, the solvent of the purified water equipment will reverse its original penetration direction, From the concentrated solution side to the dilute solution side through the semipermeable membrane, this phenomenon is called reverse osmosis.

For a long time, it will not only affect the effluent quality of the equipment, but also lead to the fouling of the reverse osmosis membrane of the main components of the equipment, resulting in the small output of the pure water equipment, the substandard effluent quality, or the equipment can not be used. In order to ensure the continuous and safe operation of pure water equipment, the maintenance of pure water equipment is very important.